Dimensional Gages

  • VR-50SA-CP-DG-Torsional-Damper

    Semi-Automatic Torsional  Damper Combination Machine Featuring Balancing with Automatic Pierce Correction, Dimensional Gaging, Part Marking, Rivet and Disallowed Area Sensing

  • 11962-DG-50-Brake-Rotor

    Brake Rotor Bore Gage with Temperature Compensation and Auto Feedback to Upstream Machining Operations

  • Transmission Carrier

    Fully-Automatic Multi-Station Transmission Carrier Combination Machine Featuring Dimensional Gaging, Balancing with Automatic Drill Correction, Part Orientation Flipper and Pin Stamp Marker

  • 12187-VR-500A-LT-HT-I-Tire

    Fully-Automatic Dynamic Tire Inflator Balancer with Bead Lubrication, Laser Gaging and Ink Stamp Marking

  • 12210-VR-10SA-CM-Impeller

    Impeller Balancer with Automatic Mill correction and Laser Gaging of Axial Run-Out

  • 12255-DG-100A-RPS-Refiner-Plate

    Fully-Automatic Refiner Plate Cell Featuring Gaging and C.G. Measurement of Individual Plates for Predictive Balance Optimization when Assembled Per the Cell’s Advanced Sequencing and Labeling System

  • 12261-VR-250A-DG-3S-Wheel

    Fully-Automatic Dynamic Wheel Combination Machine Featuring Part Identification, Axial & Radial Laser Gaging, Balance Audit with Orient and Mark

  • 12311-DG-50A-BG-3S-Brake-Rotor

    Fully-Automatic Brake Rotor Combination Bore & Multi-Attribute Gage Featuring Temperature Compensation and Auto Feedback to Upstream Machining Operations

  • NVH-100A-CD RDM

    Fully-Automatic RDM Balancer & NVH Combination.  Featuring Drill Correction, Laser Gaging, Drive Shaft Hung Mass Simulation and Advanced Clutch Conditioning Technology

  • 12354-VR-25SA-DG-CP-2S-Flywheel

    Semi-Automatic Flywheel Balancer with Automatic Pierce Correction, Slug Collection System, Pin Stamp Marking, Radial & Axial Dimensional Gaging

  • 12394-VR-25A-CM-3S-Flange

    Fully-Automatic Multi-Station Flange Balancer with Correction Mill, Thread Presence Check,  Dimensional Gaging & Heavy Spot Ink Marking

  • 12410-VR-5AB-CM-ECI-3S-Compressor-Wheel

    Fully-Automatic Turbo Charger Compressor Wheel Cell Featuring Automatic 2-Plane Mill Correction, Dimensional Gaging, Eddy Current Surface Defect Detection, 2D Laser Marking, Robotic Part Handling and Conveyance

  • 12431-VR-25SA-CD-Vibration-Damper

    Semi-Automatic Harmonic Vibration Damper Balancer with Automatic Servo Drill Correction, Featuring V-groove Dimensional Gaging, Auto Unload and Chip Containment

  • 12633 VR-50A-CM-BG-6S Brake Rotor-Drum

    Fully Automatic Multi-Station Combination Brake Rotor Machine featuring Balancing with Mill Correction, Dimensional Gaging, Surface Finish Measurement, Eddy Current Crack Detection, and Part Marking

  • 12558-DG-200A-TCA-2S-TCA

    In-Line Torque Converter Dimensional Gage

  • 12469-DG-100SA-HUB-GAGE

    Semi-Automatic Rear Brake Hub Dynamic Axial Endplay and Bore Gage

Technology in this machine:

BTI engineers and manufactures a complete line of manual, semi-automatic, and fully automatic industrial dimensional gages for all part types and sizes. Our gages can handle all production rates and levels of automation, from contact-type LVDT probes to non-contact laser heads, static and dynamic measurements, and gaging under load. Whether it’s a single-station gage or a multi-station gage, BTI excels at all. Typical gaging attributes include:

  • Flatness
  • Straightness
  • Circularity
  • Cylindricity
  • Perpendicularity
  • Angularity
  • Parallelism
  • Profile of a Surface
  • Circular Runout
  • Total Runout
  • Concentricity
  • Symmetry

In addition to static and dynamic balancing equipment, BTI also engineers and manufactures other types of industrial precision measurement and testing equipment, including dimensional gages, mass centering equipment, eddy current crack detection systems, surface finish measurement equipment, NVH equipment (noise vibration and harshness), functional test stands, spinners, motor testers, and resonant frequency measurement systems.

We also engineer and manufacture specialized test systems, including torque-to-turn, backlash, end play, and destructive test equipment.

Additionally, BTI’s unique ability to combine the aforementioned technologies into one fully integrated system enables our clients to reduce capital expenditures, increase product quality, and minimize floor space requirements. There is no need for costly conveyors and escapements to connect independent machines together; nor do you need to train operators on multiple machines. There is one seamless, easy-to-use operator interface with unprecedented networking, statistical, and diagnostic capability.

Whether you need a fully integrated, combined technology system (e.g., a balancer/gage/NVH combo) or independent machines, let our team of mechanical, electrical, and software engineers design and build a custom system for you.

If you don’t see the product you are looking for, or have specific questions, please contact us.

Sales Inquiry

*

*

*

*

*

*

Equipment Interests

In-house Measurement & Testing Services